How much does a plumber charge per hour in Houston?

Houston plumbers who bill hourly commonly charge roughly $75 to $200 per hour depending on the company, the technician's level, and whether it is after hours, plus parts. Many companies have moved to flat-rate pricing instead, where the whole job is quoted as one number before work starts. Hugo Plumbing does not charge by the hour; every job is priced flat, with labor and materials included, and quoted in writing before we begin.

How much is a plumber service call fee in Houston?

Trip or diagnostic fees in Houston commonly run somewhere between $50 and $150, and some companies credit the fee toward the repair if you approve the work. Others, including Hugo Plumbing, charge nothing for the visit or the diagnosis and give you an exact written price before any work starts.

How much does it cost to replace a water heater in Houston?

A standard tank water heater installation from Hugo Plumbing typically starts around $2,500 and rises with tank size, venting requirements, location (attic installs cost more), and current code items such as expansion tanks, drain pans, and gas flex connectors. Tankless installations and tank-to-tankless conversions vary too much to quote sight-unseen because of gas line, venting, and electrical work. Prices are current as of September 2026.

How much does a sewer camera inspection cost in Houston?

A standard sewer camera inspection with Hugo Plumbing is generally $295 to $350 depending on access, meaning whether there is a usable cleanout or the camera has to go in through a roof vent or pulled toilet.

Why won't plumbers give a price over the phone?

Because the price depends on things that cannot be seen over the phone: whether the pipe is copper, PEX, galvanized, or cast iron; how accessible the problem is; the condition of what is around it; and what code requires once it is opened up. A plumber who gives a firm phone price is either guessing or planning to adjust it later. A rough range is reasonable; the exact price should come in writing after the technician has looked.

How Much Does a Plumber Cost in Houston? Service Fees, Hourly vs. Flat Rate, and Real Ranges

“How much is this going to cost?” is the first question nearly every caller asks, and it’s the right one. The honest answer is that plumbing pricing in Houston depends on the pricing model as much as the job, so this guide covers both: how Houston plumbers charge, what common jobs actually run, and how to compare two quotes fairly. Ranges below are current as of September 2026.

The Three Ways Houston Plumbers Charge

1. Trip fee plus hourly

The company charges to send a truck (commonly $50–$150), then bills time at roughly $75–$200 per hour plus parts. After-hours and weekend rates run higher. The downside is obvious: you don’t know the total until the work is done, and slow work, parts runs, and a second trip all land on your bill.

2. Trip fee plus flat rate

You pay for the visit, then get a fixed price for the repair from a price book. Some companies credit the trip fee toward the work; some don’t. Ask.

3. Free estimate, flat rate

The technician comes out at no charge, diagnoses the problem, and gives you one written price that covers labor and materials. You approve it or you don’t, and if you don’t, you owe nothing. This is how Hugo Plumbing works, and it’s the model we’d recommend looking for — not because it’s always the cheapest number, but because it’s the only one where you know the total before saying yes.

What Common Jobs Cost

Here are the numbers we can responsibly share. Where a job is marked “priced on site,” it’s because the range is so wide that a phone number would mislead you — see below for why.

Job	Typical range (Hugo Plumbing, Sept 2026)
Diagnosis / estimate visit	Free
Sewer camera inspection	$295–$350 depending on access
Tank water heater installation	Starts around $2,500; rises with size, venting, attic location, and code items
Garbage disposal (unit supplied by us)	$495–$625 by model, with a 5- or 10-year parts-and-labor warranty
Tankless water heater / conversion	Priced on site — gas line, venting, and electrical drive the cost
Toilet repair	Priced on site — a $20 flapper and a wax ring reset are very different jobs
Drain cleaning	Priced on site — depends on which drain, access, and what’s causing it
Faucet repair	Priced on site — brand and failure type matter
Whole-home repipe	Priced on site after a walkthrough
Sewer line repair	Priced on site after a camera inspection

For market-wide context on the bigger jobs, we’ve written detailed cost guides: water heater replacement, drain cleaning, sewer line repair, and slab leak repair.

What Drives the Price Up or Down

Access. A water heater in a garage versus one in a Houston attic. A cleanout at the foundation versus none at all. A pipe behind drywall versus under the slab.
Pipe material. Cast iron and galvanized steel take longer to cut and join than PVC, copper, or PEX, and often reveal more damage once opened.
Code items. Current Houston code adds expansion tanks, drain pans with drains, seismic-style strapping, proper venting, and gas connectors that older installs never had. A quote that skips them is a quote for work that won’t pass inspection.
Timing. Nights, weekends, and holidays cost more at most shops. Hugo Plumbing answers 24/7, and we’ll tell you up front if timing affects the price.
Scope creep. The most common way a cheap quote becomes an expensive bill. A written, exact price prevents it.

Why a Phone Quote Is Usually a Trap

We get asked for a ballpark constantly, and we’ll share the ranges above. But a firm phone price for a repair is either a guess or a lowball designed to get a truck in your driveway, after which “we found some things” turns $150 into $600. Since a legitimate estimate should cost you nothing, the safest move is to get the real number in writing before saying yes — and to compare written total to written total when you shop around.

Ways to Pay Less

Ask about discounts. Hugo Plumbing gives 10% off for customers 55 and older and 10% off for military. Coupons for repairs, replacements, water heaters, and repipes are on our coupons page. Discounts and coupons can’t be combined.
Bundle. If the water heater is being replaced anyway, that’s the time to fix the slow drain or replace the corroded shutoff valve — one trip, one setup.
Fix small things early. A running toilet or a high water bill is a cheap fix that gets expensive if you wait.
Ask about financing. For a water heater, tankless conversion, repipe, or sewer repair, Hugo Plumbing offers several financing options so the right fix doesn’t have to wait for the wrong reason — the technician goes over the plans with your written quote.
Say yes to the camera. For a recurring sewer clog, a $300 inspection often saves you from paying to clear the same line three more times.

The Bottom Line

The cheapest plumber in Houston is the one whose final bill matches the price you agreed to. Get the license number, get the price in writing, and ask what happens if they find something else. At Hugo Plumbing the estimate is free, the price is flat and exact, and you don’t pay until you’re satisfied. Call or text (713) 409-7176 — and if your drain won’t go, call Hugo.